Thor Hammer Mech Mod by Kato HCigar Clone eHookah

Thor Hammer Mech Mod

The Features:
The Thor Hammer Mech Mod Ehookah Clone by Tobeco is made of stainless steel and features deeply engraved and laser etched logos on the mod’s body, button and top cap. The Thor Hammer mod also has an individualized serial number that is laser-etched on the front portion of the body. The Thor Hammer mod also features a locking ring to prevent the mod from accidentally firing. The button's spring is fairly firm, which should also prevent the need to change out your spring for an extended amount of time with normal use.

The Thor Hammer clone can also accommodate 18350, 18500 and 18650 batteries. Each Thor Hammer mod clone comes with an extension tube to accommodate either an 18500 battery or 18650 battery. This is really convenient because you do not have to worry about purchasing anything additional or worry about trying to find extension tubes that will match your Hammer mod. When you receive your Thor Hammer, it will have the 18500 and 18650 extension tubes separate from the mod itself, and it will be in the box ready to use an 18350 battery. If you are looking for a different type of vape, please see our Oil Vaporizer selection for a wide variety of merchandise for all types of oil.

Tobeco Hammer Mod Facts and Features:

• Stainless steel body
• No circuit board (true mechanical mod)
• Laser etched engravings and logos
• Laser etched engraved individualized serial number
• Brass connections
• Airholes on the bottom for battery ventilation
• Button with locking feature
• Two stainless steel hammer mod extension tubes for 18500 and 18650 batteries
• 510 atomizer connection
• 22 mm diameter top cap
• Tobeco box

General Tips Always insert the positive side of the battery into the tube FIRST! On the Tobeco Hammer Clone, the button is on top of the mod as opposed to how most mods have the button on the bottom. The battery must be inserted correctly with the positive end facing downward and the negative portion of the battery making contact with the button. When the mod is standing in the upright position, the battery will be upside down. (Just like any mod, failing to properly insert your battery will kill your mod!) Always use batteries from reputable brands, such as AW or eFest. Failure to use these batteries can result in explosion and/or severe incorrect fitting. If your mod is not firing and you ARE NOT using AW or eFest batteries, this IS the reason

Never Stack Batteries
Prior to using your Thor Hammer mod, we suggest cleaning the connection tube, firing pin and tube threads, as well as the inside of all of the tubes. Using a microfiber towel and standard rubbing alcohol will help to remove the manufacturing oil, which will decrease the conductivity (aka decrease the resistance/drop voltage).